Aluminum Alloy Pneumatic Cylinder | HINAKA | DAI Series
SKU: N/A- The piston rods are in one piece, which will not get loose from the piston body, good concentricity and low friction. With two U-packings, which are highly resistant to friction and oil.
- Front cover with pre-lubricated bearing, low friction factor.
- Equipped with extended and adjustable end cushions to absorb dynamic energy, eliminate vibration and improve efficiency.
- The DAI series front and rear cover adopt aluminum extrusion, cylinder tube has roundness characteristics, the movement is extremely smooth.
- The forward stroke of the adjustable type can be precision positioning. An indexed type has accuracy up to 0.01mm.
Aluminum Alloy Pneumatic Cylinder | HINAKA | DAL Series
SKU: N/A- The piston rods are in one piece, which will not get loose from the piston body, good concentricity and low friction. With two U-packings, which are highly resistant to friction and oil.
- Front cover with pre-lubricated bearing, low friction factor.
- Equipped with extended and adjustable end cushions to absorb dynamic energy, eliminate vibration and improve efficiency.
- The DAI series front and rear cover adopt aluminum extrusion, cylinder tube has roundness characteristics, the movement is extremely smooth.
- The forward stroke of the adjustable type can be precision positioning. An indexed type has accuracy up to 0.01mm.
Compact Pneumatic Cylinder | HINAKA | DJ2 Series
SKU: N/A- Cylinder tube is made of anodized aluminum alloy with 25 μm coating thickness, which has good wear resistance and life more than 2500 km.
- Cylinder covers are fixed with four-tie-rods, the robust and extended piston rod and bushing to with stand larger radial force makes moves smoother.
- The magnetic sensor is embedded in the cylinder body; adjustment can be done in the slot.
- The cylinder can be easily disassembled to replace seals
- Special design, the front cover bearing can couple with piston body to make the piston stable.
Multi Stage Pneumatic Cylinder | HINAKA | DJ2T Series
SKU: N/A- The multi stage cylinder combines pistons in tandem. Without increasing the bore diameter, the cylinder may generate twice or more the output force
- This patented design has lower friction than other multi stage piston rod
- The cylinders can be operated in high speed with long service life
Pneumatic Round Cylinder | HINAKA | DI Series
SKU: N/A- Adjustable end cushions to absorb dynamic energy eliminate vibration and improve efficiency.
- The forward stroke of the adjustable type can be adjusted for precision positioning.
- The piston rod is riveted on piston body with high concentricity and low friction.
- The front and rear covers are riveted to give excellent air tightness and concentricity.
- SUS304 cylinder tubes, elegant and lightweight, good thermal dissipation and never corrosion.
- All kinds of mounting accessories are available, very convenient for installation.
Pneumatic Round Cylinder | HINAKA | DS Series
SKU: N/A- Adjustable end cushions to absorb dynamic energy eliminate vibration and improve efficiency.
- The forward stroke of the adjustable type can be adjusted for precision positioning.
- The piston rod is riveted on piston body with high concentricity and low friction.
- The front and rear covers are riveted to give excellent air tightness and concentricity.
- SUS304 cylinder tubes, elegant and lightweight, good thermal dissipation and never corrosion.
- All kinds of mounting accessories are available, very convenient for installation.
Aluminum Alloy Pneumatic Cylinder | HINAKA | DAI Series
- The piston rods are in one piece, which will not get loose from the piston body, good concentricity and low friction. With two U-packings, which are highly resistant to friction and oil.
- Front cover with pre-lubricated bearing, low friction factor.
- Equipped with extended and adjustable end cushions to absorb dynamic energy, eliminate vibration and improve efficiency.
- The DAI series front and rear cover adopt aluminum extrusion, cylinder tube has roundness characteristics, the movement is extremely smooth.
- The forward stroke of the adjustable type can be precision positioning. An indexed type has accuracy up to 0.01mm.
Aluminum Alloy Pneumatic Cylinder | HINAKA | DAL Series
- The piston rods are in one piece, which will not get loose from the piston body, good concentricity and low friction. With two U-packings, which are highly resistant to friction and oil.
- Front cover with pre-lubricated bearing, low friction factor.
- Equipped with extended and adjustable end cushions to absorb dynamic energy, eliminate vibration and improve efficiency.
- The DAI series front and rear cover adopt aluminum extrusion, cylinder tube has roundness characteristics, the movement is extremely smooth.
- The forward stroke of the adjustable type can be precision positioning. An indexed type has accuracy up to 0.01mm.
Compact Pneumatic Cylinder | HINAKA | DJ2 Series
- Cylinder tube is made of anodized aluminum alloy with 25 μm coating thickness, which has good wear resistance and life more than 2500 km.
- Cylinder covers are fixed with four-tie-rods, the robust and extended piston rod and bushing to with stand larger radial force makes moves smoother.
- The magnetic sensor is embedded in the cylinder body; adjustment can be done in the slot.
- The cylinder can be easily disassembled to replace seals
- Special design, the front cover bearing can couple with piston body to make the piston stable.
Multi Stage Pneumatic Cylinder | HINAKA | DJ2T Series
- The multi stage cylinder combines pistons in tandem. Without increasing the bore diameter, the cylinder may generate twice or more the output force
- This patented design has lower friction than other multi stage piston rod
- The cylinders can be operated in high speed with long service life
Pneumatic Round Cylinder | HINAKA | DI Series
- Adjustable end cushions to absorb dynamic energy eliminate vibration and improve efficiency.
- The forward stroke of the adjustable type can be adjusted for precision positioning.
- The piston rod is riveted on piston body with high concentricity and low friction.
- The front and rear covers are riveted to give excellent air tightness and concentricity.
- SUS304 cylinder tubes, elegant and lightweight, good thermal dissipation and never corrosion.
- All kinds of mounting accessories are available, very convenient for installation.
Pneumatic Round Cylinder | HINAKA | DS Series
- Adjustable end cushions to absorb dynamic energy eliminate vibration and improve efficiency.
- The forward stroke of the adjustable type can be adjusted for precision positioning.
- The piston rod is riveted on piston body with high concentricity and low friction.
- The front and rear covers are riveted to give excellent air tightness and concentricity.
- SUS304 cylinder tubes, elegant and lightweight, good thermal dissipation and never corrosion.
- All kinds of mounting accessories are available, very convenient for installation.
Aluminum Alloy Pneumatic Cylinder | HINAKA | DAI Series
- The piston rods are in one piece, which will not get loose from the piston body, good concentricity and low friction. With two U-packings, which are highly resistant to friction and oil.
- Front cover with pre-lubricated bearing, low friction factor.
- Equipped with extended and adjustable end cushions to absorb dynamic energy, eliminate vibration and improve efficiency.
- The DAI series front and rear cover adopt aluminum extrusion, cylinder tube has roundness characteristics, the movement is extremely smooth.
- The forward stroke of the adjustable type can be precision positioning. An indexed type has accuracy up to 0.01mm.
Aluminum Alloy Pneumatic Cylinder | HINAKA | DAL Series
- The piston rods are in one piece, which will not get loose from the piston body, good concentricity and low friction. With two U-packings, which are highly resistant to friction and oil.
- Front cover with pre-lubricated bearing, low friction factor.
- Equipped with extended and adjustable end cushions to absorb dynamic energy, eliminate vibration and improve efficiency.
- The DAI series front and rear cover adopt aluminum extrusion, cylinder tube has roundness characteristics, the movement is extremely smooth.
- The forward stroke of the adjustable type can be precision positioning. An indexed type has accuracy up to 0.01mm.
Compact Pneumatic Cylinder | HINAKA | DJ2 Series
- Cylinder tube is made of anodized aluminum alloy with 25 μm coating thickness, which has good wear resistance and life more than 2500 km.
- Cylinder covers are fixed with four-tie-rods, the robust and extended piston rod and bushing to with stand larger radial force makes moves smoother.
- The magnetic sensor is embedded in the cylinder body; adjustment can be done in the slot.
- The cylinder can be easily disassembled to replace seals
- Special design, the front cover bearing can couple with piston body to make the piston stable.
Multi Stage Pneumatic Cylinder | HINAKA | DJ2T Series
- The multi stage cylinder combines pistons in tandem. Without increasing the bore diameter, the cylinder may generate twice or more the output force
- This patented design has lower friction than other multi stage piston rod
- The cylinders can be operated in high speed with long service life
Pneumatic Round Cylinder | HINAKA | DI Series
- Adjustable end cushions to absorb dynamic energy eliminate vibration and improve efficiency.
- The forward stroke of the adjustable type can be adjusted for precision positioning.
- The piston rod is riveted on piston body with high concentricity and low friction.
- The front and rear covers are riveted to give excellent air tightness and concentricity.
- SUS304 cylinder tubes, elegant and lightweight, good thermal dissipation and never corrosion.
- All kinds of mounting accessories are available, very convenient for installation.
Pneumatic Round Cylinder | HINAKA | DS Series
- Adjustable end cushions to absorb dynamic energy eliminate vibration and improve efficiency.
- The forward stroke of the adjustable type can be adjusted for precision positioning.
- The piston rod is riveted on piston body with high concentricity and low friction.
- The front and rear covers are riveted to give excellent air tightness and concentricity.
- SUS304 cylinder tubes, elegant and lightweight, good thermal dissipation and never corrosion.
- All kinds of mounting accessories are available, very convenient for installation.
Aluminum Alloy Pneumatic Cylinder | HINAKA | DAI Series
- The piston rods are in one piece, which will not get loose from the piston body, good concentricity and low friction. With two U-packings, which are highly resistant to friction and oil.
- Front cover with pre-lubricated bearing, low friction factor.
- Equipped with extended and adjustable end cushions to absorb dynamic energy, eliminate vibration and improve efficiency.
- The DAI series front and rear cover adopt aluminum extrusion, cylinder tube has roundness characteristics, the movement is extremely smooth.
- The forward stroke of the adjustable type can be precision positioning. An indexed type has accuracy up to 0.01mm.
Aluminum Alloy Pneumatic Cylinder | HINAKA | DAL Series
- The piston rods are in one piece, which will not get loose from the piston body, good concentricity and low friction. With two U-packings, which are highly resistant to friction and oil.
- Front cover with pre-lubricated bearing, low friction factor.
- Equipped with extended and adjustable end cushions to absorb dynamic energy, eliminate vibration and improve efficiency.
- The DAI series front and rear cover adopt aluminum extrusion, cylinder tube has roundness characteristics, the movement is extremely smooth.
- The forward stroke of the adjustable type can be precision positioning. An indexed type has accuracy up to 0.01mm.
Compact Pneumatic Cylinder | HINAKA | DJ2 Series
- Cylinder tube is made of anodized aluminum alloy with 25 μm coating thickness, which has good wear resistance and life more than 2500 km.
- Cylinder covers are fixed with four-tie-rods, the robust and extended piston rod and bushing to with stand larger radial force makes moves smoother.
- The magnetic sensor is embedded in the cylinder body; adjustment can be done in the slot.
- The cylinder can be easily disassembled to replace seals
- Special design, the front cover bearing can couple with piston body to make the piston stable.
Multi Stage Pneumatic Cylinder | HINAKA | DJ2T Series
- The multi stage cylinder combines pistons in tandem. Without increasing the bore diameter, the cylinder may generate twice or more the output force
- This patented design has lower friction than other multi stage piston rod
- The cylinders can be operated in high speed with long service life
Pneumatic Round Cylinder | HINAKA | DI Series
- Adjustable end cushions to absorb dynamic energy eliminate vibration and improve efficiency.
- The forward stroke of the adjustable type can be adjusted for precision positioning.
- The piston rod is riveted on piston body with high concentricity and low friction.
- The front and rear covers are riveted to give excellent air tightness and concentricity.
- SUS304 cylinder tubes, elegant and lightweight, good thermal dissipation and never corrosion.
- All kinds of mounting accessories are available, very convenient for installation.
Pneumatic Round Cylinder | HINAKA | DS Series
- Adjustable end cushions to absorb dynamic energy eliminate vibration and improve efficiency.
- The forward stroke of the adjustable type can be adjusted for precision positioning.
- The piston rod is riveted on piston body with high concentricity and low friction.
- The front and rear covers are riveted to give excellent air tightness and concentricity.
- SUS304 cylinder tubes, elegant and lightweight, good thermal dissipation and never corrosion.
- All kinds of mounting accessories are available, very convenient for installation.
